Support #778
Updated by Daniel Curtis almost 9 years ago
This is a guide on how I compiled and flashed GRBL on an Arduino UNO using Arch Linux. h2. Prepare the Environment * Make sure the system is up to date: <pre> sudo pacman -Syu </pre> * Install a few dependencies: <pre> sudo pacman -S base-devel git avr-gcc </pre> * Install the arduino package from the AUR: <pre> yaourt -S arduino </pre> h2. Compile GRBL * Download the latest GRBL source code from GitHub: <pre> git clone https://github.com/grbl/grbl cd grbl </pre> * Compile GRBL: <pre> make clean make grbl.hex </pre> h2. Flash GRBL * Flash the hex file using avrdude: <pre> avrdude -C/etc/avrdude.conf -C\etc\avrdude.conf -pm328p -carduino -P/dev/ttyACM0 -P\dev\ttyACM0 -D -Uflash:w:grbl.hex </pre> h2. Resource * https://github.com/grbl/grbl * https://github.com/grbl/grbl/wiki/Compiling-Grbl * https://github.com/grbl/grbl/wiki/Flashing-Grbl-to-an-Arduino