Support #433
Updated by Daniel Curtis over 9 years ago
{{>toc}}
Here is a procedure to install a FreeBSD with Nginx, MariaDB and PHP server stack. If any version of the packages needs to be changed, replace the versions in the commands accordingly.
h1. Pre-installation requirements
* Before installation of the components, make sure everything is up to date using the following command:
<pre>
pkg update -f && pkg upgrade
</pre>
* Install portmaster:
<pre>
cd /usr/ports/ports-mgmt/portmaster
make install clean
pkg2ng
</pre>
* Edit the @/etc/hosts@ file
<pre>
vi /etc/hosts
</pre>
#* And add/modify the following line:
<pre>
192.168.1.100 www.example.com
</pre>
---
h1. Install Nginx
* Install Nginx
<pre>
portmaster www/nginx
</pre>
* Start and enable nginx at boot:
<pre>
echo 'nginx_enable="YES"' >> /etc/rc.conf
service nginx start
</pre>
* Create a configuration directory to make managing individual server blocks easier
<pre>
mkdir /usr/local/etc/nginx/conf.d
</pre>
* Edit the main nginx config file:
<pre>
vi /usr/local/etc/nginx/nginx.conf
</pre>
#* And strip down the config file and add the include statement at the end to make it easier to handle various server blocks:
<pre>
#user nobody;
worker_processes 1;
error_log /var/log/nginx-error.log;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
# Load config files from the /etc/nginx/conf.d directory
include /usr/local/etc/nginx/conf.d/*.conf;
}
</pre>
h2. Create a Default Static Website
Start by setting up a simple static website, no server-side stuff PHP or Ruby; just plain HTML, CSS, JavaScript, etc.
* Create a directory for the web site:
<pre>
mkdir /usr/local/www/www.example.com
</pre>
* Add a *default site server block*:
<pre>
vi /usr/local/etc/nginx/conf.d/default.conf
</pre>
#* Add the following:
<pre>
server {
listen 80 default_server;
server_name www.example.com;
access_log /var/log/www.example.com.log main;
location / {
root /usr/local/www/www.example.com;
index index.html index.htm;
}
# redirect server error pages to the static page /50x.html
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/local/www/nginx-dist;
}
}
</pre>
---
h1. Install PHP
The PHP support in FreeBSD is extremely modular so the base install is very limited. It is very easy to add support using the _lang/php5-extensions_ port. This port provides a menu driven interface to PHP extension installation. Alternatively, individual extensions can be installed using the appropriate port.
* Install PHP5 and other supporting packages:
<pre>
portmaster lang/php5
</pre>
* Install PHP extensions and a few modules:
<pre>
portmaster lang/php5-extensions databases/php5-mysql databases/php5-mysqli databases/php5-pdo_mysql www/php5-session
</pre>
*NOTE*: There are many more PHP modules, to search for more PHP modules run:
<pre>
find /usr/ports/ -name "php5-*"
</pre>
*NOTE*: PHP capabilities can be further extended by using PECL packages, to search for more PECL packages run:
<pre>
find /usr/ports/ -name "pecl-*"
</pre>
* Configure the default PHP settings
<pre>
cp /usr/local/etc/php.ini-production /usr/local/etc/php.ini
</pre>
h2. Configure PHP-FPM
* Edit @/usr/local/etc/php-fpm.conf@:
<pre>
vi /usr/local/etc/php-fpm.conf
</pre>
#* Make the following changes:
<pre>
events.mechanism = kqueue
listen = /var/run/php-fpm.sock
listen.owner = www
listen.group = www
listen.mode = 0666
</pre>
* Start and enable PHP-FPM at boot:
<pre>
echo 'php_fpm_enable="YES"' >> /etc/rc.conf
service php-fpm start
</pre>
* Restart nginx:
<pre>
service nginx restart
</pre>
h2. Create a PHP Website
* Create a directory for the web application:
<pre>
mkdir /usr/local/www/phpapp.example.com
</pre>
* Add a *phpapp.example.com server block*:
<pre>
vi /usr/local/etc/nginx/conf.d/phpapp.example.com.conf
</pre>
#* Add the following:
<pre>
server {
listen 80;
server_name phpapp.example.com;
root /usr/local/www/phpapp.example.com;
access_log /var/log/phpapp.example.com-access.log;
error_log /var/log/phpapp.example.com-error.log
location / {
index index.php index.html index.htm;
}
# For all PHP requests, pass them on to PHP-FPM via FastCGI
location ~ \.php$ {
fastcgi_pass unix:/var/run/php-fpm.sock;
fastcgi_param SCRIPT_FILENAME /usr/local/www/phpapp.example.com$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_script_name;
include fastcgi_params; # include extra FCGI params
}
}
</pre>
---
h1. Install Phusion Passenger
* Reinstall Nginx with Passenger support
<pre>
portmaster www/rubygem-passenger
</pre>
*NOTE*: Make sure to enable *@[X]NGINX@* when running make @config-recursive@ on _rubygem-passenger_
*NOTE*: Make sure to enable *@[X]PASSENGER@* when running @make config@ on _nginx_
*NOTE*: Ruby capabilities can be further extended by using rubygem packages, to search for more packages run:
<pre>
find /usr/ports/ -name "rubygem-*"
</pre>
h2. h3. Configure Passenger
* Edit the main nginx config file:
<pre>
vi /usr/local/etc/nginx/nginx.conf
</pre>
#* And add the Passenger config parameters:
<pre>
#user nobody;
worker_processes 1;
error_log /var/log/nginx-error.log;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
# Load Phusion Passenger module globally
passenger_root /usr/local/lib/ruby/gems/2.1/gems/passenger-5.0.6;
passenger_ruby /usr/local/bin/ruby21;
passenger_max_pool_size 15;
passenger_pool_idle_time 300;
# Load config files from the /etc/nginx/conf.d directory
include /usr/local/etc/nginx/conf.d/*.conf;
}
</pre>
h2. Create a Ruby Website
* Create a directory for the web application:
<pre>
mkdir /usr/local/www/rubyapp.example.com
</pre>
* Add a *rubyapp.example.com server block*:
<pre>
vi /usr/local/etc/nginx/conf.d/rubyapp.example.com.conf
</pre>
#* Add the following:
<pre>
server {
listen 80;
server_name rubyapp.example.com;
root /usr/local/www/rubyapp.example.com/public;
access_log /var/log/rubyapp.example.com-access.log;
error_log /var/log/rubyapp.example.com-error.log
passenger_enabled on;
passenger_user www;
passenger_group www;
}
</pre>
---
h1. Securing Nginx With SSL
* Install OpenSSL:
<pre>
portmaster security/openssl
</pre>
Enabling SSL in Nginx is simple. First add the ssl directive in the server listen option, then add the SSL certificate and key paths.
* The basic SSL server block should be look similar to the following:
<pre>
server {
listen 443 ssl;
server_name www.example.com;
ssl_certificate www.example.com.crt;
ssl_certificate_key www.example.com.key;
...
}
</pre>
* Setup the Diffie-Hellman Key Exchange Parameters
<pre>
cd /usr/local/etc/nginx
openssl dhparam -out dhparam.pem 4096 2048
</pre>
* Generate a strong SSL key and a CSR to send for signing by a CA:
<pre>
cd /usr/local/etc/nginx
openssl req -sha512 -out www.example.com.csr -new -newkey rsa:4096 -nodes -keyout www.example.com.key
</pre>
#* If the received SSL certificate requires additional bundle certificates, add them together like so:
<pre>
cd /usr/local/etc/nginx
cat www.example.com.crt www.example.com.bundle > www.example.com.chained.crt
</pre>
* Setup the default site Nginx configuration:
<pre>
vi /usr/local/etc/nginx/conf.d/www.example.com.conf /usr/local/etc/nginx/nginx.conf
</pre>
#* Then add or modify the configuration to look similar to the following:
<pre>
server {
listen 80;
listen 443 default ssl;
server_name www.example.com;
# Turn on ans set SSL key/cert
ssl #ssl on;
ssl_certificate_key /etc/ssl/certs/www.example.com.pem;
ssl_certificate /usr/local/etc/nginx/www.example.com.crt;
ssl_certificate_key /usr/local/etc/nginx/www.example.com.key; /etc/ssl/certs/ca-bundle.pem;
# Strong SSL configuration
ssl_ciphers 'AES128+EECDH:AES128+EDH:!aNULL';
'ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES256-GCM-SHA384:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:DES-CBC3-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!CAMELLIA:!DES:!MD5:!PSK:!RC4';
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_session_cache builtin:1000 shared:SSL:10m;
ssl_stapling on;
ssl_stapling_verify on;
ssl_prefer_server_ciphers on;
ssl_dhparam /usr/local/etc/nginx/dhparam.pem;
add_header Strict-Transport-Security max-age=63072000;
add_header X-Frame-Options DENY;
add_header X-Content-Type-Options nosniff;
root /usr/local/www/;
index index.html index.htm;
autoindex on;
server_name www.example.com;
# Uncomment to force HTTPS
# if ($scheme = http) {
#
return 301 https://$server_name$request_uri;
#
}
}
</pre>
h3. Certificate Bundles
Some browsers may complain about a certificate signed by a well-known certificate authority, while other browsers may accept the certificate without issues. This occurs because the issuing authority has signed the server certificate using an intermediate certificate that is not present in the certificate base of well-known trusted certificate authorities which is distributed with a particular browser. In this case the authority provides a bundle of chained certificates which should be concatenated to the signed server certificate.
* The server certificate must appear before the chained certificates in the combined file:
<pre>
cat www.example.com.crt bundle.crt > www.example.com.chained.crt
</pre>
* The resulting file should be used in the ssl_certificate directive:
<pre>
server {
listen 443 ssl;
server_name www.example.com;
ssl_certificate www.example.com.chained.crt;
ssl_certificate_key www.example.com.key;
...
}
</pre>
---
h1. Install MariaDB
* Install MariaDB 5.5 server and client
<pre>
portmaster databases/mariadb55-server databases/mariadb55-client
</pre>
h2. Configure MariaDB server
* Configure the MariaDB server
<pre>
cp /usr/local/share/mysql/my-small.cnf /usr/local/etc/my.cnf
</pre>
#* *my-small.cnf* - for systems with up to 64 Mb of RAM.
#* *my-medium.cnf* - for systems with up to 128 Mb of RAM (ideal for web servers).
#* *my-large.cnf* - for systems with 512 Mb of RAM (dedicated MySQL servers).
#* *my-huge.cnf* - for systems with 1-2 Gb of RAM (datacentres etc.).
* Enable MariaDB to start at boot:
<pre>
echo 'mysql_enable="YES"' >> /etc/rc.conf
</pre>
* Start MariaDB
<pre>
service mysql-server start
</pre>
* Set password for mysql using the following command
<pre>
mysqladmin -uroot password
</pre>
* Restart mysql using the following commands:
<pre>
service mysql-server restart
</pre>
h2. Install and configure phpMyAdmin
* Install phpmyadmin:
<pre>
pkg install phpmyadmin
</pre>
* Setup phpMyAdmin for nginx by adding the following to the server{ } block in /usr/local/etc/nginx/nginx.conf:
<pre>
## phpMyAdmin
location ^~ /phpmyadmin {
access_log off;
rewrite ^ /phpMyAdmin/ permanent;
}
location /phpMyAdmin {
root /usr/local/www/phpMyAdmin;
index index.php index.html;
## Only Allow connections from localhost
allow 127.0.0.1;
deny all;
location ~ ^/phpMyAdmin/(.*\.php)$ {
root /usr/local/www/phpMyAdmin;
fastcgi_pass unix:/var/run/php-fpm.sock;
fastcgi_param SCRIPT_FILENAME /usr/local/www/phpMyAdmin$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_script_name;
include fastcgi_params; # include extra FCGI params
}
}
</pre>
Now its time to configure phpMyAdmin. Do this by creating the file @/usr/local/www/phpMyAdmin/config.inc.php@, the basic configuration file for phpMyAdmin. Traditionally, users have manually created or modified @/usr/local/www/phpMyAdmin/config.inc.php@, but now phpMyAdmin includes a nice setup script, making it much easier to create this file with the settings you want.
* Start by creating the directory /usr/local/www/phpMyAdmin/config and make it writable by the phpMyAdmin setup script:
<pre>
mkdir /usr/local/www/phpMyAdmin/config
chmod o+w /usr/local/www/phpMyAdmin/config
</pre>
* Then make @/usr/local/www/phpMyAdmin/config.inc.php@ readable by the phpMyAdmin setup script:
<pre>
chmod o+r /usr/local/www/phpMyAdmin/config.inc.php
</pre>
* Now open your web browser and navigate to http://www.example.com/phpmyadmin/setup where you will see the phpMyAdmin setup _Overview_ page.
* Select *New Server* and then select the *Authentication* tab.
*# Under the *Authentication type* choose +http+ from the drop-down list (using HTTP-Auth to sign-in into phpMyAdmin will avoid storing login/password credentials directly in config.inc.php)
*# And remove +root+ from the *User for config auth*.
* Now select *Apply* and you will be returned you to the Overview page where you should see a new server listed.
* Select *Save* again in the Overview page to save your configuration as @/usr/local/www/phpMyAdmin/config/config.inc.php@.
* Now let’s move that file up one directory to @/usr/local/www/phpMyAdmin@ where phpMyAdmin can make use of it.
<pre>
mv /usr/local/www/phpMyAdmin/config/config.inc.php /usr/local/www/phpMyAdmin
</pre>
* Now let’s try out phpMyAdmin to make sure it works. Point your web browser to http://www.example.com/phpmyadmin where you will be presented with a pop-up box requesting you to log in.
Use “root” and the MySQL password you set up previously, then you should be directed to the phpMyAdmin administration page.
* We no longer need the /usr/local/www/phpMyAdmin/config directory so let’s remove it, and the read permission we added previously to /usr/local/www/phpMyAdmin/config.inc.php:
<pre>
rm -r /usr/local/www/phpMyAdmin/config
chmod o-r /usr/local/www/phpMyAdmin/config.inc.php
</pre>
* And wrap up by restarting the nginx and MySQL servers:
<pre>
service nginx restart
service mysql-server restart
</pre>
h1. Resources
* http://www.bsdnow.tv/tutorials/nginx
* http://forums.freebsd.org/viewtopic.php?t=30268